Products

  • TYSH80S Conductor Pulley Tri-Bundle Stringing Block

    TYSH80S Conductor Pulley Tri-Bundle Stringing Block

    TYSH80S Tri-Bundle Stringing Block, TYSZ3-1 Pulley Board

    Uses: Applied to one pull three bundle small bore conductor in line construction, and maximum applicable angle iron 90.

     

  • Galvanized Steel Line Cable Clamp Three Bolt Guy Clamp

    Galvanized Steel Line Cable Clamp Three Bolt Guy Clamp

    Guy clamp is a type of suspension clamp for overhead power line and communication line, it can be used in loop type guy dead-ends. Guy clamp is also called guy wire clamp, parallel groove clamp or straight cable suspension clamp.

  • TYFUX Anti-twisting Steel Braided Rope

    TYFUX Anti-twisting Steel Braided Rope

    Anti-twisting braided wire rope with high strength hot dip galvanized steel quality air processed by the special process of special woven rope line. It has high strength, good flexibility, corrosion rust-proof, not to fight the golden hook, and difficult to tie, long life and so on. Tension applied to pay-off power lines construction, lifting equipment with the balance shaft and the tail rope of mine, port and other major lift crane wire rope does not rotate when the required place.

  • TYSHW Five Aluminum Conductor Pulleys

    TYSHW Five Aluminum Conductor Pulleys

    The pulleys are suitable for string four bundled conductor lines.

  • TYSHSN Three Nylon Conductor Pulleys

    TYSHSN Three Nylon Conductor Pulleys

    The pulleys are suitable for string two or three bundled conductor lines.

  • TYSHDN Single Nylon Conductor Pulleys

    TYSHDN Single Nylon Conductor Pulleys

    Wheel material aluminum or Nylon, and it could be covered by rubber.

  • TYSHD Single Aluminum Conductor Pulleys

    TYSHD Single Aluminum Conductor Pulleys

    Wheel material aluminum or Nylon, and it could be covered by rubber.

  • TYTFX Rope Pulling Hoist Pull Or Lift Ropes

    TYTFX Rope Pulling Hoist Pull Or Lift Ropes

    1.Specially heat-treated and proof tested steel chain hoists equipped with a safety guard.

    2.Got certificate of ISO9001&CE&GS.

    3.Automatic double-pawl braking system.

    4.Asbestor-free brake discs.

    5.Drop forged hooks and hook holders to ensure superior quallity and safety.

    6.Chains are made of special alloy steel that is exclusively.

    7.More thickness of sheet cover,gear cover and side plates for good quality.

    8.The static test is 4 times of capacity, and running test is 1.5 times of capacity one by one.

    9.Complies with EC Council Directive 2006/42/EC Machinery, ASME B30.16,AS1418.2.

  • TYSZ Head Boards For One Rope Pulling Two Conductors

    TYSZ Head Boards For One Rope Pulling Two Conductors

    The head board is designed to connect the pulling rope (max 28mm) with 2 to 5 bundled conductors. Special models with different characteristics can be designed according to customer’s needs.

  • TYSUB Ratchet Cutters Cutting Steel Rope

    TYSUB Ratchet Cutters Cutting Steel Rope

    Technical Data Model Application Weight(kg) SUB-J400 Steel strand ≤80mm2;ACSR≤400mm2 2 SUB-J600 Steel strand ≤100mm2;ACSR≤600mm2 2 SUB-J800 Steel strand ≤120mm2;ACSR≤800mm2 3.6 SUB-J1200 Steel strand ≤150mm2;ACSR≤1200mm2 7
  • TYST Conductor Lifter For Transmission Line Construction

    TYST Conductor Lifter For Transmission Line Construction

    Technical Data Model Rated load (kN) Tray length (mm) Weight (kg) ST8 8 60 0.9 ST12 12 120 2.5 ST25 25 160 7 ST40 40 250 10.5 Model Rated load (KN) Hook groove length (mm) Weight (kg) ST25-2 2X12 120 13 Two bundled Conductors ST50-2 2X25 160 25 Two bundled Conductors ST80-2 2X40 250 40 Two bundled Conductors ST36-3 3X12 120 21 Three bundled Conductors ST75-3 3X25 160 35 Three bundled Conductors ST120-3 3X40 250 60 Three bundled Conductors ST48-4 4X12 120 35 Fo...
  • TYSLX Swivel Joints For Transmission Line Construction

    TYSLX Swivel Joints For Transmission Line Construction

    The swivel joints are suitable to connect the pulling rope to the mesh sock joint mounted on the conductor, they are mounted on thrust bearings and they are designed to avoid torsion stain accumulation. They are made of highly tensile galvanized steel, the special design can bear the high radial loads, which occur during the passage over the pulleys.