Products
-
Portable Gas Powered Compact Hydraulic Pump
USE WITH POLE PULLER
Full reversing control. The Cube is equipped with a commercial grade gasoline engine for years of trouble free service and all terrain pneumatic tires for easy portability.10″ All terrain pneumatic tires for easy portability on most surfaces. 3/4 Inch steel handle for lasting durability and quality. 1 1/2 Gallon hydraulic fluid reservoir, 1″ steel tubing frame and a 4 way/ 3 position manual valve with relief. pole puller, hydraulic utility pole puller, pole pulling equipment. -
Pillar Gasoline Portable Sampling Rig for Roads Railroads and Bridges
Backpack Sampling Rig Drill with CE
The hand-held sampling rig can take soil samples, core samples, and guide holes for grouting. It is a multi-purpose micro-engineering rig. A core drilling rig that can be operated by 2 people, with a drilling depth of up to 20 meters.
-
Climbing Equipment Climbing Spikes Grapplers
New Innovative Profile for enhanced durability. Same tried and true climbing feel. Same proven and effective replaceable gaff, gaff angle and position. The existing 14 series replaceable gaffs and most accessories will continue to be compatible with the new BD14B. However, due to the new and unique shank profile, Bashlin has also developed a new version of the 105 and 145 series pads with steel inserts to accommodate the unique shape. The new pad series (105F, 145FCV, 145FCVW, etc) is specifically designed to be compatible with the new shape.
-
Domestically Produced Steel Plain Finish US Type Turnbuckle
Take up slack with a Crosby HG228 jaw/jaw Turnbuckles are manufactured with the end fittings quenched and tempered. The jaw allows connection to rigging hardware that can not be opened, an eye bolt for instance.
Used to apply tension to wire ropes such as guy lines, median barriers, architectural wire ropes or adjust the length of sling legs in multiple leg lifting applications.
The bodies are heat treated by normalizing, the finish is then hot dip galvanized for long term corrosion resistance and long service life.
Used for for Lifting, Holding And Tensioning the HG228 range meets or exceeds all requirements of ASME B30.26.Recommended for a straight or in-line pull only.
We don’t know when or if this item will be back in stock.
Crosby products meet or exceed all requirements of ASME B30.26
Hot Dip galvanized steel
Turnbuckles recommended for straight or in-line pull only
-
Termination Tool Jack Rapid Punch Down Tool
The Fluke Networks JR-LEV-1 JackRapid Punch Down Tool is a cable termination tool that is designed to give technicians maximal efficiency in cable maintenance. The JackRapid terminates jacks 8 times faster than normal tools by seating and terminating all wires at once with a simple handle squeeze. The JackRapids built-in blade cuts off excess wire, eliminating a secondary trim step. This device is designed in such a way that allows users make terminations in cramped spaces. Although the format of the JackRapid termination tool is designed to deal mainly with LEVITON 41106, 41108 and 5G108 ends it sports a replaceable blade head for use with other types of jacks.
-
P-YDB-10 High Voltage Fiberglass Telescopic Electroscope
The Fluke Voltage Detector detects ac and dc voltages through a long-life carbide tip. Protect yourself and other technicians by using this simple device to test conductive objects within minutes, you can avoid exposure to high voltage electrician shock.
Voltage Tester The Fluke Networks C9970 High Voltage Detector detects AC and DC voltages through a long-life carbide tip. Protect yourself and other technicians by using this simple device to test conductive objects within minutes, you can avoid exposure to high voltage electrical shock. It only requires interaction with a source of energy and a pull of the trigger to use. A green LED indicates the area is free of hazardous voltage. If a red LED flashes, hazardous voltage is present.
Low-voltage threshold is 50 V AC RMS and up or 6 V DC and up. High-voltage protection is up to 20,000 V AC RMS or 2000 V DC -
P-HT Drilling Rig Machine for Sampling Coring
Specification
Brief introductions of diesel engine sampling drilling rig
The diesel engine sampling drilling rig is independently developed by Shandong Master Machinery Group Co.,Ltd., which is a portable multi-purpose drilling rig. The diesel engine sampling drilling rig is equipped with a hoist, which is more
convenient for geological drilling and lifting. It can do standard drilling hole, earth sampling and cone penetration with the heavy hammer.
The diesel engine sampling drilling rig uses diesel power, and it is more convenient to purchase oil. The rig is reasonable in design, advanced in structure, easy to assemble and disassemble, small in size, light in weight and easy to transport, which brings great convenience for field investigation and construction. -
Digital Voltage Meter High Voltage Testing Equipment
0-40KV Digital Volt Meter: two-stick voltmeter for measuring and phasing overhead distribution voltages up to 40KV and up to 240KV if used with resistors. Digital voltage phasing meter. Instrument for measuring overhead and underground voltages.
-
Aluminum Alloy Clad Steel Reinforced Conductors Steel Reinforced
Transmission line and Substation system
Conductor Type:
AAC-All Aluminum Conductors
AAAC -All Aluminum Alloy Conductors
ACSR- Aluminum Conductors Steel Reinforced
ACSR/AW -Aluminum Conductors Aluminum Clad Steel Reinforced
ACAR-All Aluminum Conductor Alloy Reinforced
AACSR-Aluminum Alloy Conductors Steel Reinforced
GSW-Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand
ACS-aluminum-clad steel conductors
-
Cable Grip Steel Wire Puller/Cable Puller Tool
The cable grips pulling are made of alloy steel, the structure is compact and strong, special heat treatment, durable, stable, and high strength.
With strong resistance and high bite, not easy to slip and deform. It can adjust the overhead power lines, which can solve the problem of sagging and tightening them.
The jaw with an anti-chip safety device, ensures the safety and the jumper. With delicate and smooth tongs, minimal damage to the lead.
For all kinds of steel cables apply to electric power, the operation of industry and agriculture, and the tightening of the rope line.
Applicable wire diameter 4-22mm, Max Load 2 Ton. If you have any questions about our products, please feel free to contact us.
-
P-NLL-1 Strain Clamp/Bolted Tension Clamp
Bolted Tension Clamp is used for fixing the terminal of the conductor and ground wire on the tension tower. They can bear all or part of the tension of the conductor and ground wire.
Usage scenarios: Transmission line system, substation system, distribution system
Technical features:
There is no need to cut the wire, and it is fixed with several U-shaped screws, but the grip strength is not as good as the compression type. -
Analog Probe Tracing Kit Network/Analog Tone Generator
Signal Interference can be caused by multiple sources (I.e. power cables, fans, lighting, etc.) and can make tracing communication cabling almost impossible.
Analog Tone Generator and Probe Tracing Kit Network probe utilizes innovative filter technology to obstruct signal interference to make tracing your cable easier, regardless of the work environment. Depending on the region, signal interference may be at 60 Hz, which is most common in North America, or 50 Hz, which is more common in Europe and Asia. For this reason, there are 2 versions of Analog Tone Generator and Probe Tracing Kit Network Filtered Probe. Analog Tone Generator and Probe Tracing Kit Network60, which obstructs 60 Hz signals and its harmonics and Analog Tone Generator and Probe Tracing Kit Network50, which blocks interference at 50 Hz and its harmonics.
