Products

  • Climbing Spikes Grapplers Lineman Pole Climbing Boots

    Climbing Spikes Grapplers Lineman Pole Climbing Boots

    Climbing Spikes Grapplers Lineman Pole Climbing Boots

    New Innovative Profile for enhanced durability. Same tried and true climbing feel. Same proven and effective replaceable gaff, gaff angle and position. The existing 14 series replaceable gaffs and most accessories will continue to be compatible with the new BD14B. However, due to the new and unique shank profile, Bashlin has also developed a new version of the 105 and 145 series pads with steel inserts to accommodate the unique shape. The new pad series (105F, 145FCV, 145FCVW, etc) is specifically designed to be compatible with the new shape.

  • Climbing Spikes Grapplers Climbing Gear Upgrade

    Climbing Spikes Grapplers Climbing Gear Upgrade

    Climbing Spikes Grapplers Climbing Gear Upgrade

    New Innovative Profile for enhanced durability. Same tried and true climbing feel. Same proven and effective replaceable gaff, gaff angle and position. The existing 14 series replaceable gaffs and most accessories will continue to be compatible with the new BD14B. However, due to the new and unique shank profile, Bashlin has also developed a new version of the 105 and 145 series pads with steel inserts to accommodate the unique shape. The new pad series (105F, 145FCV, 145FCVW, etc) is specifically designed to be compatible with the new shape.

  • Lineman Climbers With Top and Botom Straps

    Lineman Climbers With Top and Botom Straps

    Lineman Climbers With Top and Botom Straps

    New Innovative Profile for enhanced durability. Same tried and true climbing feel. Same proven and effective replaceable gaff, gaff angle and position. The existing 14 series replaceable gaffs and most accessories will continue to be compatible with the new BD14B. However, due to the new and unique shank profile, Bashlin has also developed a new version of the 105 and 145 series pads with steel inserts to accommodate the unique shape. The new pad series (105F, 145FCV, 145FCVW, etc) is specifically designed to be compatible with the new shape.

  • Domestically Produced Steel Plain Finish US Type Jaw Turnbuckle

    Domestically Produced Steel Plain Finish US Type Jaw Turnbuckle

    Take up slack with a Crosby HG228 jaw/jaw Turnbuckles are manufactured with the end fittings quenched and tempered. The jaw allows connection to rigging hardware that can not be opened, an eye bolt for instance.

    Used to apply tension to wire ropes such as guy lines, median barriers, architectural wire ropes or adjust the length of sling legs in multiple leg lifting applications. 

    The bodies are heat treated by normalizing, the finish is then hot dip galvanized for long term corrosion resistance and long service life.

    Used for for Lifting, Holding And Tensioning the HG228 range meets or exceeds all requirements of ASME B30.26.Recommended for a straight or in-line pull only.

    We don’t know when or if this item will be back in stock.

    Crosby products meet or exceed all requirements of ASME B30.26

    Hot Dip galvanized steel

    Turnbuckles recommended for straight or in-line pull only

    Domestically Produced Steel Plain Finish US Type Jaw Turnbuckles

  • Galvanized Drop Forged U Type Turnbuckles

    Galvanized Drop Forged U Type Turnbuckles

    Take up slack with a Crosby HG228 jaw/jaw Turnbuckles are manufactured with the end fittings quenched and tempered. The jaw allows connection to rigging hardware that can not be opened, an eye bolt for instance.

    Used to apply tension to wire ropes such as guy lines, median barriers, architectural wire ropes or adjust the length of sling legs in multiple leg lifting applications. 

    The bodies are heat treated by normalizing, the finish is then hot dip galvanized for long term corrosion resistance and long service life.

    Used for for Lifting, Holding And Tensioning the HG228 range meets or exceeds all requirements of ASME B30.26.Recommended for a straight or in-line pull only.

    We don’t know when or if this item will be back in stock.

    Crosby products meet or exceed all requirements of ASME B30.26

    Hot Dip galvanized steel

    Turnbuckles recommended for straight or in-line pull only

    Galvanized Drop Forged U Type Turnbuckles

  • Galvanized Drop Forged US Type Turnbuckle Jaw

    Galvanized Drop Forged US Type Turnbuckle Jaw

    Take up slack with a Crosby HG228 jaw/jaw Turnbuckles are manufactured with the end fittings quenched and tempered. The jaw allows connection to rigging hardware that can not be opened, an eye bolt for instance.

    Used to apply tension to wire ropes such as guy lines, median barriers, architectural wire ropes or adjust the length of sling legs in multiple leg lifting applications. 

    The bodies are heat treated by normalizing, the finish is then hot dip galvanized for long term corrosion resistance and long service life.

    Used for for Lifting, Holding And Tensioning the HG228 range meets or exceeds all requirements of ASME B30.26.Recommended for a straight or in-line pull only.

    We don’t know when or if this item will be back in stock.

    Crosby products meet or exceed all requirements of ASME B30.26

    Hot Dip galvanized steel

    Turnbuckles recommended for straight or in-line pull only

    Galvanized Drop Forged US Type Turnbuckle Jaw

  • Steel Plain Finish US Type Turnbuckle Rigging Screw Jaw

    Steel Plain Finish US Type Turnbuckle Rigging Screw Jaw

    Take up slack with a Crosby HG228 jaw/jaw Turnbuckles are manufactured with the end fittings quenched and tempered. The jaw allows connection to rigging hardware that can not be opened, an eye bolt for instance.

    Used to apply tension to wire ropes such as guy lines, median barriers, architectural wire ropes or adjust the length of sling legs in multiple leg lifting applications. 

    The bodies are heat treated by normalizing, the finish is then hot dip galvanized for long term corrosion resistance and long service life.

    Used for for Lifting, Holding And Tensioning the HG228 range meets or exceeds all requirements of ASME B30.26.Recommended for a straight or in-line pull only.

    We don’t know when or if this item will be back in stock.

    Crosby products meet or exceed all requirements of ASME B30.26

    Hot Dip galvanized steel

    Turnbuckles recommended for straight or in-line pull only

    Steel Plain Finish US Type Turnbuckle Rigging Screw Jaw

  • Stainless Steel Turnbuckle Rigging Screw Jaw

    Stainless Steel Turnbuckle Rigging Screw Jaw

    Take up slack with a Crosby HG228 jaw/jaw Turnbuckles are manufactured with the end fittings quenched and tempered. The jaw allows connection to rigging hardware that can not be opened, an eye bolt for instance.

    Used to apply tension to wire ropes such as guy lines, median barriers, architectural wire ropes or adjust the length of sling legs in multiple leg lifting applications. 

    The bodies are heat treated by normalizing, the finish is then hot dip galvanized for long term corrosion resistance and long service life.

    Used for for Lifting, Holding And Tensioning the HG228 range meets or exceeds all requirements of ASME B30.26.Recommended for a straight or in-line pull only.

    We don’t know when or if this item will be back in stock.

    Crosby products meet or exceed all requirements of ASME B30.26

    Hot Dip galvanized steel

    Turnbuckles recommended for straight or in-line pull only

    Stainless Steel Turnbuckle Rigging Screw Jaw

  • Heavy Duty Industrial Turnbuckles Jaw Turnbuckle Take Up

    Heavy Duty Industrial Turnbuckles Jaw Turnbuckle Take Up

    Take up slack with a Crosby HG228 jaw/jaw Turnbuckles are manufactured with the end fittings quenched and tempered. The jaw allows connection to rigging hardware that can not be opened, an eye bolt for instance.

    Used to apply tension to wire ropes such as guy lines, median barriers, architectural wire ropes or adjust the length of sling legs in multiple leg lifting applications. 

    The bodies are heat treated by normalizing, the finish is then hot dip galvanized for long term corrosion resistance and long service life.

    Used for for Lifting, Holding And Tensioning the HG228 range meets or exceeds all requirements of ASME B30.26.Recommended for a straight or in-line pull only.

    We don’t know when or if this item will be back in stock.

    Crosby products meet or exceed all requirements of ASME B30.26

    Hot Dip galvanized steel

    Turnbuckles recommended for straight or in-line pull only

    Heavy Duty Industrial Turnbuckles Jaw Turnbuckle Take Up

  • Galvanized Drop Forged Turnbuckle Jaw

    Galvanized Drop Forged Turnbuckle Jaw

    Take up slack with a Crosby HG228 jaw/jaw Turnbuckles are manufactured with the end fittings quenched and tempered. The jaw allows connection to rigging hardware that can not be opened, an eye bolt for instance.

    Used to apply tension to wire ropes such as guy lines, median barriers, architectural wire ropes or adjust the length of sling legs in multiple leg lifting applications. 

    The bodies are heat treated by normalizing, the finish is then hot dip galvanized for long term corrosion resistance and long service life.

    Used for for Lifting, Holding And Tensioning the HG228 range meets or exceeds all requirements of ASME B30.26.Recommended for a straight or in-line pull only.

    We don’t know when or if this item will be back in stock.

    Crosby products meet or exceed all requirements of ASME B30.26

    Hot Dip galvanized steel

    Turnbuckles recommended for straight or in-line pull only

    Galvanized Drop Forged Turnbuckle Jaw

  • Open Body Steel Plain Finish US Type Turnbuckle Jaw

    Open Body Steel Plain Finish US Type Turnbuckle Jaw

    Take up slack with a Crosby HG228 jaw/jaw Turnbuckles are manufactured with the end fittings quenched and tempered. The jaw allows connection to rigging hardware that can not be opened, an eye bolt for instance.

    Used to apply tension to wire ropes such as guy lines, median barriers, architectural wire ropes or adjust the length of sling legs in multiple leg lifting applications. 

    The bodies are heat treated by normalizing, the finish is then hot dip galvanized for long term corrosion resistance and long service life.

    Used for for Lifting, Holding And Tensioning the HG228 range meets or exceeds all requirements of ASME B30.26.Recommended for a straight or in-line pull only.

    We don’t know when or if this item will be back in stock.

    Crosby products meet or exceed all requirements of ASME B30.26

    Hot Dip galvanized steel

    Turnbuckles recommended for straight or in-line pull only

    Open Body Steel Plain Finish US Type Turnbuckle Jaw

  • Galvanized Drop Forged Turnbuckle Jaw

    Galvanized Drop Forged Turnbuckle Jaw

    Take up slack with a Crosby HG228 jaw/jaw Turnbuckles are manufactured with the end fittings quenched and tempered. The jaw allows connection to rigging hardware that can not be opened, an eye bolt for instance.

    Used to apply tension to wire ropes such as guy lines, median barriers, architectural wire ropes or adjust the length of sling legs in multiple leg lifting applications. 

    The bodies are heat treated by normalizing, the finish is then hot dip galvanized for long term corrosion resistance and long service life.

    Used for for Lifting, Holding And Tensioning the HG228 range meets or exceeds all requirements of ASME B30.26.Recommended for a straight or in-line pull only.

    We don’t know when or if this item will be back in stock.

    Crosby products meet or exceed all requirements of ASME B30.26

    Hot Dip galvanized steel

    Turnbuckles recommended for straight or in-line pull only

    Galvanized Drop Forged Turnbuckle Jaw