Powerline tools

  • P-NLL-1 Strain Clamp/Bolted Tension Clamp

    P-NLL-1 Strain Clamp/Bolted Tension Clamp

    Bolted Tension Clamp is used for fixing the terminal of the conductor and ground wire on the tension tower. They can bear all or part of the tension of the conductor and ground wire.

    Usage scenarios: Transmission line system, substation system, distribution system

    Technical features:
    There is no need to cut the wire, and it is fixed with several U-shaped screws, but the grip strength is not as good as the compression type.

  • Analog Probe Tracing Kit Network/Analog Tone Generator

    Analog Probe Tracing Kit Network/Analog Tone Generator

    Signal Interference can be caused by multiple sources (I.e. power cables, fans, lighting, etc.) and can make tracing communication cabling almost impossible.

    Analog Tone Generator and Probe Tracing Kit Network probe utilizes innovative filter technology to obstruct signal interference to make tracing your cable easier, regardless of the work environment. Depending on the region, signal interference may be at 60 Hz, which is most common in North America, or 50 Hz, which is more common in Europe and Asia. For this reason, there are 2 versions of Analog Tone Generator and Probe Tracing Kit Network Filtered Probe. Analog Tone Generator and Probe Tracing Kit Network60, which obstructs 60 Hz signals and its harmonics and Analog Tone Generator and Probe Tracing Kit Network50, which blocks interference at 50 Hz and its harmonics.

  • Galvanized Steel Line Cable Clamp Three Bolt Guy Clamp

    Galvanized Steel Line Cable Clamp Three Bolt Guy Clamp

    Guy clamp is a type of suspension clamp for overhead power line and communication line, it can be used in loop type guy dead-ends. Guy clamp is also called guy wire clamp, parallel groove clamp or straight cable suspension clamp.

  • TYTFX Rope Pulling Hoist Pull Or Lift Ropes

    TYTFX Rope Pulling Hoist Pull Or Lift Ropes

    1.Specially heat-treated and proof tested steel chain hoists equipped with a safety guard.

    2.Got certificate of ISO9001&CE&GS.

    3.Automatic double-pawl braking system.

    4.Asbestor-free brake discs.

    5.Drop forged hooks and hook holders to ensure superior quallity and safety.

    6.Chains are made of special alloy steel that is exclusively.

    7.More thickness of sheet cover,gear cover and side plates for good quality.

    8.The static test is 4 times of capacity, and running test is 1.5 times of capacity one by one.

    9.Complies with EC Council Directive 2006/42/EC Machinery, ASME B30.16,AS1418.2.

  • TYSZ Head Boards For One Rope Pulling Two Conductors

    TYSZ Head Boards For One Rope Pulling Two Conductors

    The head board is designed to connect the pulling rope (max 28mm) with 2 to 5 bundled conductors. Special models with different characteristics can be designed according to customer’s needs.

  • TYSUB Ratchet Cutters Cutting Steel Rope

    TYSUB Ratchet Cutters Cutting Steel Rope

    Technical Data Model Application Weight(kg) SUB-J400 Steel strand ≤80mm2;ACSR≤400mm2 2 SUB-J600 Steel strand ≤100mm2;ACSR≤600mm2 2 SUB-J800 Steel strand ≤120mm2;ACSR≤800mm2 3.6 SUB-J1200 Steel strand ≤150mm2;ACSR≤1200mm2 7
  • TYST Conductor Lifter For Transmission Line Construction

    TYST Conductor Lifter For Transmission Line Construction

    Technical Data Model Rated load (kN) Tray length (mm) Weight (kg) ST8 8 60 0.9 ST12 12 120 2.5 ST25 25 160 7 ST40 40 250 10.5 Model Rated load (KN) Hook groove length (mm) Weight (kg) ST25-2 2X12 120 13 Two bundled Conductors ST50-2 2X25 160 25 Two bundled Conductors ST80-2 2X40 250 40 Two bundled Conductors ST36-3 3X12 120 21 Three bundled Conductors ST75-3 3X25 160 35 Three bundled Conductors ST120-3 3X40 250 60 Three bundled Conductors ST48-4 4X12 120 35 Fo...
  • TYSLX Swivel Joints For Transmission Line Construction

    TYSLX Swivel Joints For Transmission Line Construction

    The swivel joints are suitable to connect the pulling rope to the mesh sock joint mounted on the conductor, they are mounted on thrust bearings and they are designed to avoid torsion stain accumulation. They are made of highly tensile galvanized steel, the special design can bear the high radial loads, which occur during the passage over the pulleys.

  • TYSLWS Temporary Mesh Sock Joints

    TYSLWS Temporary Mesh Sock Joints

    DOUBLE HEAD TYPE

    The double head type temporary mesh sock joints are specifically designed to temporarily connect the aluminum, steel, or copper conductor to the pulling rope. They consist of variable pitch steel wires, which effectively distribute the gripping effect on the conductor.

  • TYSLW Temporary Mesh Sock Joints

    TYSLW Temporary Mesh Sock Joints

    Mesh socket joints are used for pulling overhead conductor, OPGW and earth wires, or underground power cable or telecom optic fiber cable. They are braided from high strength galvanized steel wire. These socks are designed and manufactured according to different cables.

    The head-type and double head-type temporary mesh sock joints are specifically designed to temporarily connect the aluminum steel or copper conductors to the pulling rope.

  • TYSLU Highly Tensile Galvanized Steel Connectors

    TYSLU Highly Tensile Galvanized Steel Connectors

    The connectors are specifically designed to connect pilot rope lengths or pulling rope lengths and to pass over the puller bull wheels. They are made of highly tensile galvanized steel

  • TYSKJL Self Gripping Clamps General Clamp

    TYSKJL Self Gripping Clamps General Clamp

    The come along clamp is used to hold the unfolded wire or ground wire after paying off or tightening operation, so as to complete relevant work on the line. According to the purpose of the come along clamp, there are wire clamp, ground wire clamp, optical cable clamp and wire rope clamp. It is mainly used for clamping steel strand, traction wire rope and aluminum alloy wire, etc.