Powerline tools
-
Galvanized Drop Forged Turnbuckle Jaw
Take up slack with a Crosby HG228 jaw/jaw Turnbuckles are manufactured with the end fittings quenched and tempered. The jaw allows connection to rigging hardware that can not be opened, an eye bolt for instance.
Used to apply tension to wire ropes such as guy lines, median barriers, architectural wire ropes or adjust the length of sling legs in multiple leg lifting applications.
The bodies are heat treated by normalizing, the finish is then hot dip galvanized for long term corrosion resistance and long service life.
Used for for Lifting, Holding And Tensioning the HG228 range meets or exceeds all requirements of ASME B30.26.Recommended for a straight or in-line pull only.
We don’t know when or if this item will be back in stock.
Crosby products meet or exceed all requirements of ASME B30.26
Hot Dip galvanized steel
Turnbuckles recommended for straight or in-line pull only
Galvanized Drop Forged Turnbuckle Jaw
-
Open Body Steel Plain Finish US Type Turnbuckle Jaw
Take up slack with a Crosby HG228 jaw/jaw Turnbuckles are manufactured with the end fittings quenched and tempered. The jaw allows connection to rigging hardware that can not be opened, an eye bolt for instance.
Used to apply tension to wire ropes such as guy lines, median barriers, architectural wire ropes or adjust the length of sling legs in multiple leg lifting applications.
The bodies are heat treated by normalizing, the finish is then hot dip galvanized for long term corrosion resistance and long service life.
Used for for Lifting, Holding And Tensioning the HG228 range meets or exceeds all requirements of ASME B30.26.Recommended for a straight or in-line pull only.
We don’t know when or if this item will be back in stock.
Crosby products meet or exceed all requirements of ASME B30.26
Hot Dip galvanized steel
Turnbuckles recommended for straight or in-line pull only
Open Body Steel Plain Finish US Type Turnbuckle Jaw
-
Galvanized Drop Forged Turnbuckle Jaw
Take up slack with a Crosby HG228 jaw/jaw Turnbuckles are manufactured with the end fittings quenched and tempered. The jaw allows connection to rigging hardware that can not be opened, an eye bolt for instance.
Used to apply tension to wire ropes such as guy lines, median barriers, architectural wire ropes or adjust the length of sling legs in multiple leg lifting applications.
The bodies are heat treated by normalizing, the finish is then hot dip galvanized for long term corrosion resistance and long service life.
Used for for Lifting, Holding And Tensioning the HG228 range meets or exceeds all requirements of ASME B30.26.Recommended for a straight or in-line pull only.
We don’t know when or if this item will be back in stock.
Crosby products meet or exceed all requirements of ASME B30.26
Hot Dip galvanized steel
Turnbuckles recommended for straight or in-line pull only
Galvanized Drop Forged Turnbuckle Jaw
-
Hot Dipped Galvanized Steel Jaw Drop Forged Turnbuckles
Take up slack with a Crosby HG228 jaw/jaw Turnbuckles are manufactured with the end fittings quenched and tempered. The jaw allows connection to rigging hardware that can not be opened, an eye bolt for instance.
Used to apply tension to wire ropes such as guy lines, median barriers, architectural wire ropes or adjust the length of sling legs in multiple leg lifting applications.
The bodies are heat treated by normalizing, the finish is then hot dip galvanized for long term corrosion resistance and long service life.
Used for for Lifting, Holding And Tensioning the HG228 range meets or exceeds all requirements of ASME B30.26.Recommended for a straight or in-line pull only.
We don’t know when or if this item will be back in stock.
Crosby products meet or exceed all requirements of ASME B30.26
Hot Dip galvanized steel
Turnbuckles recommended for straight or in-line pull only
-
Hot Dipped Galvanized Steel Jaw Turnbuckle Take Up
Take up slack with a Crosby HG228 jaw/jaw Turnbuckles are manufactured with the end fittings quenched and tempered. The jaw allows connection to rigging hardware that can not be opened, an eye bolt for instance.
Used to apply tension to wire ropes such as guy lines, median barriers, architectural wire ropes or adjust the length of sling legs in multiple leg lifting applications.
The bodies are heat treated by normalizing, the finish is then hot dip galvanized for long term corrosion resistance and long service life.
Used for for Lifting, Holding And Tensioning the HG228 range meets or exceeds all requirements of ASME B30.26.Recommended for a straight or in-line pull only.
We don’t know when or if this item will be back in stock.
Crosby products meet or exceed all requirements of ASME B30.26
Hot Dip galvanized steel
Turnbuckles recommended for straight or in-line pull only
-
Fluke Networks JackRapid Punch Down Tool for Leviton
The Fluke Networks JR-LEV-1 JackRapid Punch Down Tool is a cable termination tool that is designed to give technicians maximal efficiency in cable maintenance. The JackRapid terminates jacks 8 times faster than normal tools by seating and terminating all wires at once with a simple handle squeeze. The JackRapids built-in blade cuts off excess wire, eliminating a secondary trim step. This device is designed in such a way that allows users make terminations in cramped spaces. Although the format of the JackRapid termination tool is designed to deal mainly with LEVITON 41106, 41108 and 5G108 ends it sports a replaceable blade head for use with other types of jacks.
-
Jackrapid Termination Tool for Leviton
The Fluke Networks JR-LEV-1 JackRapid Punch Down Tool is a cable termination tool that is designed to give technicians maximal efficiency in cable maintenance. The JackRapid terminates jacks 8 times faster than normal tools by seating and terminating all wires at once with a simple handle squeeze. The JackRapids built-in blade cuts off excess wire, eliminating a secondary trim step. This device is designed in such a way that allows users make terminations in cramped spaces. Although the format of the JackRapid termination tool is designed to deal mainly with LEVITON 41106, 41108 and 5G108 ends it sports a replaceable blade head for use with other types of jacks.
-
Metal Fluke Jack Rapid Punch Down Tool
The Fluke Networks JR-LEV-1 JackRapid Punch Down Tool is a cable termination tool that is designed to give technicians maximal efficiency in cable maintenance. The JackRapid terminates jacks 8 times faster than normal tools by seating and terminating all wires at once with a simple handle squeeze. The JackRapids built-in blade cuts off excess wire, eliminating a secondary trim step. This device is designed in such a way that allows users make terminations in cramped spaces. Although the format of the JackRapid termination tool is designed to deal mainly with LEVITON 41106, 41108 and 5G108 ends it sports a replaceable blade head for use with other types of jacks.
-
P-JR-LEV-1 Termination Tool Jack Rapid Punch Down Tool
The Fluke Networks JR-LEV-1 JackRapid Punch Down Tool is a cable termination tool that is designed to give technicians maximal efficiency in cable maintenance. The JackRapid terminates jacks 8 times faster than normal tools by seating and terminating all wires at once with a simple handle squeeze. The JackRapids built-in blade cuts off excess wire, eliminating a secondary trim step. This device is designed in such a way that allows users make terminations in cramped spaces. Although the format of the JackRapid termination tool is designed to deal mainly with LEVITON 41106, 41108 and 5G108 ends it sports a replaceable blade head for use with other types of jacks.
-
High Voltage Telescopic Electroscope Detector
High Voltage Telescopic Electroscope Detector
The Fluke Voltage Detector detects ac and dc voltages through a long-life carbide tip. Protect yourself and other technicians by using this simple device to test conductive objects within minutes, you can avoid exposure to high voltage electrician shock.
Voltage Tester The Fluke Networks C9970 High Voltage Detector detects AC and DC voltages through a long-life carbide tip. Protect yourself and other technicians by using this simple device to test conductive objects within minutes, you can avoid exposure to high voltage electrical shock. It only requires interaction with a source of energy and a pull of the trigger to use. A green LED indicates the area is free of hazardous voltage. If a red LED flashes, hazardous voltage is present.
Low-voltage threshold is 50 V AC RMS and up or 6 V DC and up. High-voltage protection is up to 20,000 V AC RMS or 2000 V DC -
High Voltage Fiberglass Telescopic Electroscope Detector
High Voltage Fiberglass Telescopic Electroscope Detector
The Fluke Voltage Detector detects ac and dc voltages through a long-life carbide tip. Protect yourself and other technicians by using this simple device to test conductive objects within minutes, you can avoid exposure to high voltage electrician shock.
Voltage Tester The Fluke Networks C9970 High Voltage Detector detects AC and DC voltages through a long-life carbide tip. Protect yourself and other technicians by using this simple device to test conductive objects within minutes, you can avoid exposure to high voltage electrical shock. It only requires interaction with a source of energy and a pull of the trigger to use. A green LED indicates the area is free of hazardous voltage. If a red LED flashes, hazardous voltage is present.
Low-voltage threshold is 50 V AC RMS and up or 6 V DC and up. High-voltage protection is up to 20,000 V AC RMS or 2000 V DC -
High Voltage 35KV Fiberglass Telescopic Electroscope
High Voltage 35KV Fiberglass Telescopic Electroscope
The Fluke Voltage Detector detects ac and dc voltages through a long-life carbide tip. Protect yourself and other technicians by using this simple device to test conductive objects within minutes, you can avoid exposure to high voltage electrician shock.
Voltage Tester The Fluke Networks C9970 High Voltage Detector detects AC and DC voltages through a long-life carbide tip. Protect yourself and other technicians by using this simple device to test conductive objects within minutes, you can avoid exposure to high voltage electrical shock. It only requires interaction with a source of energy and a pull of the trigger to use. A green LED indicates the area is free of hazardous voltage. If a red LED flashes, hazardous voltage is present.
Low-voltage threshold is 50 V AC RMS and up or 6 V DC and up. High-voltage protection is up to 20,000 V AC RMS or 2000 V DC
